TOP source of information about PRINTMAKING

Printing BIG – Ben Muñoz Box of Mistakes
Artists

Printing BIG – Ben Muñoz Box of Mistakes

Printing BIG and learning from my mistakes

by Ben Muñoz

I recently carved and printed six blocks that were eight ft high and four ft wide. Throughout the process, I learned a lot about printing BIG, mainly through mistakes that I would like to share with you now. Some are obvious while others may come as a surprise to you so please bear with me as I go through them.


Ben’s Box of Mistakes
Part 1 (Printing)

Carving big is fun but if you can’t find a press large enough to print when the time comes everyone will hate you including yourself.

After you’ve made the decision to carve something of ridiculous proportion do yourself a favor and find the largest press in your area, measure the press bed, take an inch or two off of the width and and height, and that’s the size of your block.

If you have a completion date in mind see if you can book the press time now, that way you don’t end up running some handprint sweatshop made up of your use to be friends powered on the false promise of fun and stale pizza.

Not to mention if this is your first time carving something of this size a deadline is definitely a must. As the world’s leading expert on missing deadlines, I can tell you that if you PAY in advance for nonrefundable press time it will get you carving quick. Deadlines without consequence rarely have an effect on me but hey maybe you’re a better person than I am, if not put some money down.

If your ambition outgrows the presses in your area and you just have to carve something massive call me and I will do my very best to talk you out of it.

If I am unsuccessful then you need to think about people, barrens, and space. With my blocks, it took a minimum of three people to print. You need a minimum of three just to lay the paper down and that’s still an inconvenience because if you only have three people that means everyone handling the paper was also just inking so we now have to stop and wash our hands.

When you have the same three people doing everything it’s a lot of stops and goes which is super frustrating because you’re up against the clock of spritzed paper and premium ink on that block.

At the same time, I would say that you don’t want too many people. For my project, I needed no more than six people including myself after that people would just be in the way. Even when hand printing the block you can only fit a few people around it before you’re bumping into each other knocking everything over like one of those weird infomercials with the suburban dads.


Ben’s Big Box of Mistakes
Part 2 (Think Things Through)

Remember that preparation is everything. There are a few things to keep in mind and check on before you start carving. You can find the time to do these things in between your mental breakdowns.

First, if you’re drawing with the block laying down on a flat surface make sure and stand it up every once in a while to get a better look before you begin carving. Chances are that your perspective is off because of the length of the block. Standing the block upright will give you a better understanding of how it will look when you print. Do that before you start carving to avoid the type of surprises that ruin a week.

Let’s talk paper, so obviously, you’re going to want to pick a thick or thin paper based on how you’re planning on printing these but keep in mind that if you go over seven feet high you’re in for a roll. You could still get sheets in that size but it gets very expensive and usually comes from another country so get ready to wait. I bought the Lennox that I used to print from Paper Arts, a paper store in Dallas, Texas. They had a few types of paper in that size to choose from and Terri Thoman (the owner) is very helpful and can get you almost anything you’re looking for.

The problem we ran into was that we had bought Lennox for printing on a press, but when the time came we couldn’t find a press large enough to print them. At least not one that was close and would work with our timeline. We ended up running the edition by hand which was as fun as it sounds.


TOP Printmaking is an affiliate of several programs, meaning that if you purchase something through our links, the project may get a small percentage cut of the overall sale. For more information check our Affiliate disclosure. 
Legion Lenox Cotton Drawing Paper Roll

Legion Lenox 100 Cotton Paper

The textured finish of this fine art paper makes it ideal for silkscreen work, offset lithography, etching, and embossing.
It’s machine-made in the USA, out of 100% cotton. Neutral pH, no deckles. 250 gsm weight.


If you find yourself hand printing a big block with a thick paper by hand get yourself some Print Frogs. They’re heavy glass barrens that make the whole process way easier. Overall the ink density was pretty solid using only those frogs. Some sections of the block had large areas of black that I felt sure we wouldn’t be able to get by hand but those sections printed great! They looked fuller than a Walmart on the first of the month.

In conclusion, remember to have fun it sounds cliche I know but there will be a halfway point where you think “wow this sucks why did I think this was a good idea??” at that moment I want you to remember two things.

The first is why you started this whole project to begin with, for me it was to tell the story of my family and that was worth the minor inconvenience of hand cramps and late nights carving monotonous textures.

The second thing that I want you to remember is that there are very few things as sexy as the sound of that paper being pulled back off of a woodblock that size. If for some crazy reason your block just burst into flames immediately after pulling one print it would still be worth all the work if only for the satisfaction of peeling back that sexy beast of a print off of the block.

If you’re thinking of printing BIG learn from my mistakes and have fun! You won’t regret it.

Stay beautiful and keep slinging ink!


This article was written by Benjamin Muñoz and all images and videos copyright © benmunoz 2019

You can get to know him better on his website.


You can also leave comments to the author below, he will respond as soon as possible.



Hope you enjoyed. If so, please leave a comment.
It’s a great help for the project and an easy way to give us a helping hand. 😉

If you don’t want to miss our next articles…

9 Comments

  • Donald Furst December 6, 2018 at 1:59 pm

    A most enjoyable read—a sense of humor goes a long way when doing a major, “serious” art work. The advice is valuable and the tone is fun. Well done.

    Reply
    • TOP Team December 6, 2018 at 4:47 pm

      Many thanks for your visit and comment. This text is really well achieved and we have to congratulate the author who managed to brilliantly give a helping hand to all of us.

      Reply
  • Cisco December 6, 2018 at 8:46 pm

    Way to go Ben! We still have our very small printmaking group that meets on Weds. None of us carve big but it is alot of fun!

    Reply
  • Sandy Wimer January 14, 2019 at 7:07 pm

    Curious to know which ink he used with his Lennox paper. Thanks for an interesting article.

    Reply
    • TOP Team January 14, 2019 at 8:01 pm

      Hi Sandy.
      Thanks for the visit and comment.
      Let’s wait for his response to find out. 😉

      Reply
  • fernando gómez January 16, 2019 at 11:47 am

    I like so much your article, Benjamin. It was a very good idea to write about printing using our mistakes and difficulties as a premise. Thanks a lot and a big hug.

    Reply
    • TOP Team January 20, 2019 at 11:11 pm

      Hi Fernando.
      Thanks for your visit and comment.

      Reply
  • Theresa Taylor April 23, 2019 at 12:30 pm

    Hi
    Like others I found this really interesting and fun to read, also made me feel more inspired to work big. Have recently been making large prints in 2 parts, but now thinking about going large !!
    Thank you, Theresa

    Reply
    • TOP Team April 24, 2019 at 10:34 am

      Hi Theresa. Don’t forget to show us your results.
      Thanks for your visit and comment. 😉

      Reply

    Leave a Reply to Cisco Cancel reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.